Description
Original Bosch food processor bowl lid pusher – spare part for MCM and MUM series | SKU 00621924
Genuine Bosch food processor return to safe and full operation. Fits MCM21R1, MCM2150, MUM4 and dozens of other models. Click the 'Check Model Compatibility' button above – and verify compatibility in seconds.
⚠️ Just before ordering – safety above all!
To ensure safe use and maintain the longevity of your food processor, it is essential to use only an original tamper . Non-original tampers may not fit the feed opening, cause fingers to get caught in the blade area, and void the warranty. Now click the 'Check Model Compatibility' button at the top of the page – our system will immediately confirm that the part is suitable for your device.
What happened to your dog?
The food processor's pusher is a critical safety part. It allows you to push food through the feed tube without putting your fingers at risk near the rotating blades.
Signs it's time to replace:
- ✅ The plunger is broken, cracked or missing
- ✅ The plastic has warped and does not fit into the feed opening.
- ✅ The plunger was lost during cleaning or moving house
- ✅ The plastic color has changed or is damaged
In our experience in official service laboratories, this is one of the most requested spare parts – mainly due to intensive daily use or improper storage.
Why an original Bosch vacuum cleaner?
Perfect fit for the feed opening – the original pusher is made in Germany with precise dimensions that fit exactly into the food processor's feed chute. A non-original pusher may be too narrow (and allow fingers to enter) or too wide (and not enter at all).
BPA-Free Food Safe Material – The clear plastic meets FDA standards and is approved for direct food contact. Our certified technicians note that non-original parts are sometimes made of low-quality plastic that may release unwanted substances.
Durability over the years – the original material is resistant to scratches, heat, and wear from repeated cleaning in a dishwasher.
How do you identify the model number of your food processor?
The model number sticker on MCM series food processors is usually located on the bottom of the base of the appliance . Carefully turn the base over (with the appliance unplugged) and look for a sticker with the model number starting with MCM or MUM.
Expert tip: Take a photo of the sticker on your phone – this way you can easily check compatibility in the future.
Technical
| attribute | value |
|---|---|
| Brand: | Bosch |
| Manufacturer's SKU: | 00621924 |
| Alternative SKU: | 00422778, 00065397, 00059052, 00055879 |
| Product type: | Pusher / Feed Pusher |
| material: | Transparent plastic, BPA Free |
| Size: | Length 12 cm, width 9 cm, height 9 cm |
| Weight: | About 100 grams |
| Country of manufacture: | Germany |
| installation: | Self-contained – no tools required |
| Compatible with series: | MCM2, MCM21, MUM4, MUM5, MUM6, MUM7, MUM8 |
Selected compatible models
The pusher is compatible with dozens of models of Bosch food processors and mixers, including:
- MCM2 series: MCM21R1, MCM2150, MCM2120, MCM2050, MCM2054
- MUM4 series: MUM4400, MUM4405, MUM4420, MUM4555, MUM4570, MUM4655, MUM4750
- MUM5 series: MUM52110, MUM54230, MUM54420, MUM54620, MUM56340
- MUM6 series: MUM6012, MUM6523
- MUM8 series: MUM84MP1, MUM86MK1
This is only a partial list. Click the 'Check Compatibility' button to verify compatibility with your specific model.
Easy installation in seconds
- Make sure the food processor is unplugged.
- Remove the lid from the bowl.
- Insert the new plunger into the feed opening.
- Make sure the plunger is seated securely and moves freely.
- Put the lid back on and continue enjoying your food processor.
No tools or a technician needed – this is a simple replacement that anyone can perform.
Preventive maintenance – a tip from the experts
To extend the life of the food processor's tamper and other accessories:
- Clean the press after each use. – Wash with hot water and dish soap or put in the dishwasher.
- Store in the bowl. – Prevents loss and scratches
- Avoid exposure to direct sunlight. – May cause plastic to warp.
- Check for proper operation from time to time – Small cracks may develop into fractures
FAQ
Q: Is the press compatible with my model? A: Click the 'Check Model Compatibility' button at the top of the page. The system will immediately check if the part is compatible with your device.
Q: Is this a genuine Bosch product? A: Yes, this is a genuine Bosch (BSH) replacement part, manufactured in Germany to the same standards as the parts that come with the new appliance.
Q: Can the press be washed in the dishwasher? A: Yes, the press is dishwasher safe. It is recommended to place it on the top rack.
Q: I received an old food processor that is missing the pusher. Can I use it without it? A: Not recommended at all. The pusher is a critical safety part that prevents fingers from getting into the rotating blades.













