Description
Original conical cone for citrus juicer for Bosch food processors 00659892
Want perfect results?
To ensure the cone fits snugly and gives you the best performance, make sure it fits your citrus juicer model. Click the 'Check Model Compatibility' button above for a quick, seconds-long check.
Is the cone cracked or worn out? Here's the original solution
The citrus juicer cone is the hardest-working part – it receives direct pressure from the fruit, is exposed to powerful essential oils from the citrus peels, and spins at high speed. Over time, the plastic in non-genuine cones can wear out, crack, or dry out, leading to inefficient juicing and the loss of valuable juice. Replacing with a genuine Bosch cone ensures an immediate return to maximum juicing performance.
Why choose an original Bosch cone?
✨ Oil-resistant reinforced plastic – A dedicated material that does not degrade from exposure to lemongrass oils and citrus acids
✨ Precise design for optimal squeezing – The squeezing grooves were designed in laboratory research to extract maximum juice with minimal pressure.
✨ Perfect fit for the juicer shaft – The connection to the rotation mechanism is precise without vibrations or noise.
✨ High long-term durability – High-quality ABS plastic that withstands thousands of squeezes without signs of fatigue
✨ Safe for contact with food – Meets FDA standards and does not contain BPA or harmful substances
How does a new cone improve the squeezing experience?
Improved squeezing efficiency
A new cone with sharp, unworn grooves extracts up to 20% more juice from the same fruit. The reason: The sharp grooves penetrate the fruit flesh better and break the cells containing the juice.
Fewer grains in the juice
A worn cone can create vibrations that allow pieces of peel and berries to enter the juice. A new genuine cone creates a smooth, consistent squeeze that leaves the berries in the fruit.
Convenience in cleaning
New, smooth plastic surface doesn't absorb stains and is easier to clean. Water and dishwashing liquid glide over the surface and easily remove paste residue.
Easy replacement in three minutes – no tools required
This part is for complete DIY. The process is simple and quick:
- Remove the old cone. – Simply pull it up from the black rotating shaft
- Clean the axle. – Use a damp cloth to remove any remaining paste or oil from the hinge.
- Return the new cone. – Press the cone onto the black axis until you feel a clear “click”
- examination – Turn the cone by hand to make sure it sits firmly and does not wobble.
Estimated replacement time: 2-3 minutes
Tools Required: None
Proper maintenance to extend the life of the cone
💡 Wash immediately after use – do not leave any pulp residue to dry on the cone. The sugary juice and essential oils can create a sticky layer that is difficult to remove.
💡 Use lukewarm water – boiling water can cause the plastic to stretch and damage the grooves. Lukewarm is enough.
💡 Avoid using abrasive sponges – the cone is made of smooth plastic that can be scratched by an abrasive surface. Use a soft sponge or microfiber cloth.
💡 Natural drying – After washing, let the cone air dry. No need to dry with a towel.
💡 Proper storage – Do not place heavy objects on the cone in the cabinet. This may cause the grooves to deform.
Locating the model sticker: Where to find the food processor model number?
Sticker location:
📍 At the bottom base of the device – Turn the food processor over and look at the sticker on the bottom of the motor
📍 In the back – Sometimes the sticker is located on the back of the device near the power cord.
📍 On the original accessories box – If you saved the citrus juicer packaging, the model number is on the carton.
Essential details on the sticker:
🔹 Model number – Starts with MUM4, MUM5 or MUZ (for example: MUM58259, MUZ4ZP1)
🔹 FD (Serial number) – starts with FD followed by digits
💡 Pro tip: If you have any doubts about compatibility, take pictures of your citrus juicer from all angles and contact us with the photos – we will confirm compatibility within minutes.
Technical
| attribute | value |
|---|---|
| Manufacturer's SKU | 00659892 |
| Replaces SKU | 00653192 |
| Part type | Conical cone (Taper) for citrus juicer |
| material | Oil and acid resistant ABS plastic (BPA free) |
| צבע | Transparent/milky white |
| Built-in hinge | Yes – reinforced black pivot |
| Clamping ring | Not included in the package (sold separately if needed) |
| Base diameter | 12 cm |
| height | 7 cm |
| net weight | 85 g |
| Dishwasher safe | Yes (top shelf only) |
| compatibility | Citrus juicers for Bosch MUM4xxx, MUM5xxx processors (see table below) |
| Country of manufacture | Germany / Poland (by production cycle) |
| Manufacturer's warranty | 12 months for manufacturing defects |
| Installation difficulty level | Simple – Plug & Play (no tools required) |
Compatible models
| Juicer type | Compatible SKUs |
|---|---|
| MUM4 Juicers | MUZ4ZP1 (for MUM4xxx processors) |
| MUM5 Juicers | MUZ5ZP1 (for MUM5xxx, MUMS2xxx, MUMS4xxx processors) |
| MUM6 Juicers | MUZ6ZP1 (for MUM6xxx processors) – depends on version |
⚠️ Please note: This list is partial. The cone is compatible with genuine Bosch citrus juicers that come with a black rotating shaft. If your juicer comes with a shaft in the middle, this is the correct cone. For accurate verification, use the compatibility check button above or contact us with a picture of your juicer.
Frequently Asked Questions (FAQ)
1. How do I know if my cone needs replacing?
Signs that the cone is at the end of its life:
🔴 Visible cracks – Especially at the top of the cone or at the base
🔴 Grinding of the grooves – The notches should be sharp and prominent. If they look dull or flat – time to replace
🔴 Yellow color or spots – A sign of ongoing oxidation of the plastic from exposure to oils
🔴 Strange smell – If the cone smells strange even after a thorough rinse, the plastic has absorbed odors and cannot be removed.
🔴 Ineffective squeezing – If you get less juice from the same amount of fruit than you used to
2. Does the cone come with the outer ring?
No. This part includes only the conical cone with the black spindle built in. The outer ring (if present on your juicer) is sold separately and has a different part number. Most Bosch juicers do not require a separate ring, but the cone attaches directly to the strainer cup.
3. Is the cone also compatible with stand-alone citrus juicers (not a processor accessory)?
No. This cone is only for citrus juicers that are accessories for Bosch MUM series food processors. Stand-alone citrus juicers (such as the MCP3000 or MCP3500) use a cone with a different shape and size. If you have a stand-alone juicer, you will need to look up the part number for your specific model.
4. Can the cone be washed in a dishwasher?
Yes, but with care. The cone is dishwasher safe but it is highly recommended to place it on the top rack only to avoid direct exposure to the bottom heating element. Too high heat can warp the plastic and damage the squeeze grooves. If you wash in the dishwasher, select the ECO or delicate program with a maximum temperature of 55-60°C.
5. Why does the cone sometimes get stuck on the axle and won't come out?
This happens when pulp or juice residue dries between the cone and the shaft, creating a natural “glue.” Quick fix: Soak the juicer (including the cone) in hot water with a drop of dishwashing liquid for 10 minutes. The hot water will soften the dried residue, and the cone will come out easily. Prevention: Don’t leave the juicer dirty after use – wash it immediately.
6. Is there a difference between an original cone and a cheap replacement cone?
Significant difference. Non-original cones are usually made of softer plastic (PS instead of ABS) that wears out faster. Their grooves are often less precise, which leads to uneven squeezing. In addition, non-original plastic tends to turn yellow and smell after two to three months of intensive use. In our experience in service, an original Bosch cone lasts 3-4 times longer than a replacement.
7. Can this cone also be used for large grapefruits?
Absolutely! The cone was designed for a wide range of citrus fruits:
🍋 Lemons – Ideal size
(I.e. Oranges (Small-Medium) – Excellent Performance
(I.e. Large oranges/pomelos – Possible, but it is better to cut into smaller halves
(I.e. grapefruit – Works great up to medium size
Tip for maximum juice: Take the fruit out of the refrigerator 30 minutes before juicing, and roll it with light pressure on the kitchen surface before cutting – this softens the cells and extracts more juice.
📌 Easy replacement, instant performance upgrade: Don't compromise on the quality of your fresh juice because of a worn cone. Replacing with an original Bosch part guarantees you a return to maximum juicing with minimal effort. The original cone is designed with micron precision to extract every drop of juice from the fruit, and will last for thousands of more juicings. Invest in the original part - your fruit (and your wallet) will thank you.













