Description
Original Bosch and Siemens upper refrigerator door seal | 23002192
Rubber seal 23002192 seals the upper door, refrigerator compartment, in Bosch and Siemens KGN 39 series refrigerator-freezers. The rubber seal prevents warm air from entering and reduces frost buildup on the sides. This is a genuine OEM part, part number 23002192, with an exact fit and manufacturer warranty.
Is frost accumulating on the inside of the refrigerator? Is the compressor running almost continuously? Apparently the rubber seal on the top door is no longer sealing properly.
Before ordering, safety first. To ensure proper cooling and prevent damage to the compressor, it is important to use only genuine rubber seals. A non-genuine rubber seal may not fit accurately and shorten the life of the device. Now click the “Check Model Compatibility” button at the top of the page, and our system will immediately confirm that the part is suitable for you.
Why is it important to replace a worn rubber band in a refrigerator?
A worn gasket allows warm air to enter, causing the compressor to work harder and use more electricity. Additionally, moist air entering through the gasket creates frost on the back wall and shortens the life of the food inside. If you notice that your refrigerator is making more noise than usual, or that food is spoiling quickly, it's a good idea to check the gasket before calling a technician.
The solution: Why only an original rubber band?
An original Bosch and Siemens rubber seal is manufactured exactly according to the door profile of the KGN 39 series. The exact fit is important, because any small deviation impairs the hermetic seal. A non-original rubber seal may be too thick or too thin, and then it will not create the correct vacuum when the door is closed. You can read more about original Bosch spare parts in our categories.
Tip for locating the model
Before ordering, locate the E-Nr number of your refrigerator. For Bosch and Siemens models, it is printed on a sticker on the inside of the refrigerator, and sometimes on the back of the appliance. Compare the number to the list of compatible models below.
Original vs. Unapproved Replacement, What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| Match | Accurate to the door profile | Not guaranteed |
| Manufacturer's warranty | Saved | May be canceled |
| Safety: | Tested according to Bosch and Siemens standards | Not verified |
| resistance | Full product life | Accelerated wear, partial sealing |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 23002192 |
| brand | Bosch, Siemens |
| Door location | Upper door, refrigerator compartment |
| צבע | Gray (RAL7037) |
| compatibility | Refrigeration-freezing family KGN 39 / KG39N |
| התקנה | Simple DIY, no special tools required |
✅ Compatible models
The rubber seal is suitable for the upper door, the refrigerator compartment, in the KGN 39 / KG39N refrigerator-freezer family from Bosch and Siemens, including:
Bosch: KGN392LBF/01, KGN392LCF/01, KGN392LCG, KGN39VLCT/01 Siemens (iQ300 / iQ500): KG39N2IBF/01, KG39NAIAT/01, KG39NVIDG/02, KG39NVXCG
⚠️ Refrigerators usually have two separate rubber seals: one for the upper door and one for the lower freezer door, with different part numbers. Before ordering, check the E-Nr on the sticker to make sure that this is indeed the rubber seal for the upper door of your refrigerator.
🔧 Installation instructions
Replacing it is a simple DIY job, with no special tools required. There is no need to unplug the refrigerator, as it is a mechanical part only.
- Open the top door and pull the old rubber band out of its groove.
- Clean the groove of any dirt or old rubber fragments.
- If the new rubber band is stiff, warm it slightly in warm water to restore its flexibility.
- Insert the new rubber seal starting at one corner, and press it into place around the entire door.
- Close the door and check that it seals well along the entire perimeter.
Prefer an expert to install? Our service team is available to coordinate a professional installation.
The order includes full shipping information and a clear cancellation and return policy.
💡 Tip from the experts
Sami, our service specialist, recommends cleaning the rubber band once a month with lukewarm water and mild soap, and drying it thoroughly. Regular cleaning prevents premature hardening and significantly extends the life of the rubber band.
❓ Frequently Asked Questions
How do you check if the refrigerator's rubber seal is broken?
Place a piece of paper between the rubber seal and the door frame and close the door. If the paper comes off easily, the seal is bad. Check several spots around the door, as a rubber seal can be good in one area and loose in another.
What is the difference between the top and bottom rubber bands on this refrigerator?
Part number 23002192 is for the upper door, the refrigerator compartment. The lower freezer door has a separate part number, 23002190. Both doors require a different rubber gasket, so it is important to check which door the part is needed for before ordering.
Can a torn rubber band be repaired instead of replacing it?
A temporary fix with warm water only helps if the rubber band is stiff and not actually torn. A rubber band that is actually cracked or torn will continue to lose its seal over time, so a complete replacement is the only long-term solution.















