Description
Original Bosch and Siemens bottom freezer door seal | 23002910
The original door seal 23002910, also known as a rubber seal, seals the freezer door and prevents warm air and frost from entering the frozen food. The seal is suitable for Siemens KG49 3.0 series refrigerator models, including KG49NVXCG and KG49NVIDG. This is an original OEM part, in gray RAL7037, identical to the original manufacturer's specifications.
Is there thick frost on the sides of your freezer, even though it continues to work normally? This is almost always a sign of a door seal that has lost its tightness. Before you order, safety comes first! To ensure a successful repair and prevent damage to your frozen food, it is essential to use only an original seal. A non-original seal may not seal properly, and the same problem may return in a short time. Click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the seal is suitable for your freezer.
Why does frost form inside the freezer even when it is working properly?
Frost that builds up on the sides of your freezer is often caused by warm, moist air getting in through a damaged door seal. When the seal is cracked, dry, or not sealing properly, the moisture in the warm air freezes inside the freezer. In addition to the frost, the compressor has to work harder, and frozen food can suffer from freezer burn.
How do you check if the gasket is really damaged?
The simplest test is the paper test. Insert a sheet of paper between the door and the freezer body, and close the door on it. If the sheet is removed easily and without resistance, it means that the seal at that point is no longer sealing. It is recommended to check several points around the perimeter of the door, not just one.
The solution: an original gasket with the exact size
The original gasket is manufactured exactly to the manufacturer's specifications, including the internal magnetic strip that creates a hermetic seal. Our certified technicians note that a non-original gasket sometimes comes in a slightly incorrect size , so it does not adhere well to the freezer body, and continues to allow cold to escape.
Where do you find the model sticker?
The model sticker (E-Nr) of the refrigerator is usually located inside the refrigerator compartment, on the inner wall, sometimes behind the vegetable drawer. It is recommended to check the exact number there before ordering. You can find all original Siemens spare parts in our variety of categories.
Original vs. Unapproved Replacement – What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| Match | Accurate to the model, including color and dimensions | Not guaranteed, may remain loose |
| Manufacturer's warranty | Saved | May be canceled |
| Safety: | Tested according to manufacturer's standard | Not verified |
| resistance | Full product life, no cracks | Accelerated wear and partial impermeability |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 23002910 |
| Brand + Manufacturer Part Number (Brand+MPN) | Bosch/Siemens 23002910 |
| brand | Bosch, Siemens (BSH) |
| צבע | Gray (RAL7037) |
| compatibility | Freezer compartment, KG49 3.0 series refrigerators, according to the model list below |
| התקנה | Simple DIY, no special tools required |
✅ Compatible models
The gasket is suitable for the following models (it is recommended to verify exact fit against the E-Nr number on the sticker):
Siemens (KG49 3.0 series): KG49NVXCG, KG49NVIDG
🔧 Installation instructions
In most models, replacement is done by inserting it into the slot, without the need to disassemble the door or use complex screws.
- It is recommended to remove frozen food from the freezer before starting work, to maintain its freshness.
- Clean the edges of the door around the old gasket to remove dust and dirt.
- Gently pull the old gasket from the groove, from one corner to the other.
- Insert the new gasket into the same groove, starting from the corners and all the way around.
- Press gently along the entire circumference to make sure the gasket is securely in place.
- Close the door, and perform the paper test to ensure complete tightness.
Prefer an expert to install? Our service team is available to coordinate a professional installation.
💡 Tip from the experts
💡 Expert Tip: Sami, our service specialist, recommends warming up the new gasket slightly before installation, away from any heat source. This way, it is more flexible, fits into the groove easily, and is less likely to tear.
❓ Frequently Asked Questions
Why is there frost on the sides of the freezer?
Frost is usually caused by warm, moist air getting in through a damaged or loose door seal. The moisture in the warm air freezes on the sides, and the compressor has to work harder to maintain the temperature. Replacing the original seal stops the phenomenon.
Does frost in the freezer damage frozen food?
Yes, excessive frost can cause freezer burn, which affects the taste and texture of food. A damaged door seal also makes it difficult for the freezer to maintain a stable temperature. Repairing the seal helps maintain the quality of food over time.
Can I replace a freezer gasket myself?
Yes, it's a simple DIY job that doesn't require a technician. Pull the old rubber seal out of the groove around the door, and insert the new seal in the same manner, from the corners outwards. The replacement usually takes a few minutes, and ends with a paper test to check the tightness.
The order includes full shipping information and a clear cancellation and return policy.












