Description
Original door shelf for storing bottles for Bosch Serie 4 refrigerator | 11047861
The door shelf is broken - it's time to replace it
A broken door shelf is one of the most common problems with Bosch KGN36 refrigerators. Due to daily use, the plastic cracks along the side – and sometimes the entire piece suddenly falls off. The solution is to replace it with a new original door shelf. An original shelf fits exactly into the door tracks and quickly restores function.
Additionally, using a non-genuine replacement may increase the strain on the door mechanism. Therefore, it is recommended to replace only with a genuine Bosch part.
Why only a genuine Bosch part?
Bosch manufactures the original part from high-grade hard plastic. It is resistant to low temperatures and fits exactly into the door frame of your model. A non-original part, on the other hand, may shrink in the cold, not sit properly in the rails and break down sooner than expected. In our experience at the official Bosch service, replacing with an original part prevents repeated failures and extends the life of the device.
Just before ordering: Make sure that the SKU 11047861 matches your refrigerator model. The model number (E-Nr) is on a sticker inside the refrigerator – after removing the vegetable drawer, it can be seen on the inner wall of the refrigerator. Click the 'Check Model Compatibility' button above for instant confirmation.
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 11047861 |
| brand | Bosch |
| Original name | Tray Door Tray 100h BO |
| Type | Refrigerator door shelf – bottle compartment |
| material | Transparent hard plastic |
| height | 100 mm |
| compatibility | KGN362, KGN367, KGN36V, KGN392, KGN397, KGN39V |
| התקנה | No tools – direct replacement |
✅ Compatible models
The part fits the following models (make sure it fits exactly according to the E-Nr number on the sticker):
- KGN362IDF/01, KGN362IDF/02
- KGN362ICF/01, KGN362ICF/02
- KGN362LDF/01, KGN362LDF/02
- KGN362WDF/01, KGN362WDF/02
- KGN367ICT/01–03, KGN367ICTG/01
- KGN367LDF/01, KGN367LDF/02
- KGN367WCT/01, KGN367WCT/02
- KGN36VICT/01, KGN36VICT/02
- KGN36VIDT/01, KGN36VIDT/02
- KGN36VLDT/01, KGN36VLDT/02
- KGN36VWDT/01, KGN36VWDT/02, KGN36VWDTG/01
Can't find your model? Contact CSB Customer Service to check compatibility.
🔧 Replacement instructions
⚠️ There is no need to unplug the refrigerator – the door shelf is only a mechanical accessory.
First, remove all items from the old shelf. Then, lift the shelf up and release it from the rails on the sides of the door.
After removing the old shelf, slide the new shelf into the rails on both sides. Press down until you hear a click. Finally, check for stability by gently shaking it before placing bottles.
💡 Tip from the experts
To extend the life of your new shelf, distribute the weight of the bottles evenly along its length. Avoid concentrating heavy bottles on just one side. This simple action prevents overloading at one point and significantly extends the life of the part.
❓ Frequently Asked Questions
Where is the model sticker on the Bosch KGN362IDF refrigerator?
The model sticker (E-Nr) is located inside the refrigerator. Remove the vegetable drawer from the bottom – and you will find the sticker on the inner wall of the refrigerator. It includes the model number and the serial number, both of which are required to check the compatibility of spare parts.
Do I need to unplug the refrigerator to replace a door shelf?
No. The door shelf is a mechanical part that is not connected to electricity. Therefore, it can be replaced while the refrigerator is running. First, empty the old shelf and lift it upwards. Then, insert the new shelf into the rails until you feel a click.
The door shelf broke – is this covered by warranty?
Usually, the warranty does not cover physical breakage of a door shelf, as this is normal wear and tear. Therefore, it is recommended to purchase an original spare part and perform the replacement yourself. Purchasing from an official authorized dealer like CSB guarantees a new part that is fully compatible with your model.
















